Accustic Arts Amp III - MK2

Accustic Arts® AMP III: For those who seek a little more

The Electronics of the AMP III - MK2 has been completely redesigned and readjusted. The result is also here, a much higher performance with even better sound quality.

The AMP III - MK2 is based on the amplifier technology of our legendary AMP II amplifier and is designed for clients looking for maximum power and also desire an audiophiliary amplifier performance. Therefore, AMP III has the 4 separate final stage circuit boards from AMP II and combines it in such a way that 2 plates are available for each channel. Both plates are also divided with an investment and non-investment signal component. The AMP III - MK2 with its symmetrical technology is, therefore, a completely unique power amplifier. A surprising 48 MOS FET transistors selected by hand along with 2 huge transformers deliver a great power.

One more result of Modernization and Optimization of AMP III - MK2 is that you can now safely operate the speaker systems that have a minimum impedance of 2 ohms or less.

AMP III - MK2

Extremely powerful dual-monkey power amplifier with power supply completely isolated for each amplifier channel.
40 MOS-FET output transistors selected from the highest quality.
2 Toroidal core transformers encapsulated and magnetically shielded superior quality for higher output reserves.
Optimal softening thanks to the power supply capacity of more than 220,000 μF; First quality capacitors ("Made in Germany").
Very high damping factor.
Accustic Arts® Damping factor Linearization (switchable).
Professional protection circuit against cutout, HF oscillations and CC compensation too high.
Limitation of integrated ignition current for maximum operational security.
Balanced entry (XLR) and unbalanced entry (RCA): Tickets are switchable.
All used components and parts are selected and of the highest quality.
Bi-Wiring Speaker Terminal / Very high quality gold plated Biamplifier.
Extremely stable, massive housing and with optimized resonance, fully made of aluminum; Embedding of solid brass, polished and chrome.
    

Accustic Arts® AMP III - MK2 is "handmade in Germany".

Specifications:

Voltage gain:
30.0 db

Energy consumption without load:
approx. 230 watts

Energy supply capacity:
More than 220,000 μF

Entry impedance:
Balanced (XLR): 2 x 16kΩ
Unbalanced (RCA): 15kΩ

Nominal output power (a THD + N = 0.1%):
Max. 2 x 1,500 Watts in 2 Ω
Max. 2 x 1.350 watts in 4 Ω
Max. 2 x 880 Watts in 8 Ω

Diafonía
105 dB with 1 kHz

Signal / Noise ratio:
-96 DBA (Ref. 6,325 V)

Distortion factor (THD + N):
0.003% with 4 Ω load to 1 kHz and 10 watts

Dimensions (H x W x D):
350 x 482 x 430 mm / 13.8 x 19 x 16.9 inches

Weight:
approx. 60 kg / 132 lbs.